Replacement Knob Neff Stove
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One off the knobs on our Neff stove was missing. Designed a new one in Fusion 360 and it's working very well. Fusion…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 72
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
One off the knobs on our Neff stove was missing. Designed a new one in Fusion 360 and it's working very well.
Fusion 360 sourcefile attached.
Some tips: I printed this in ABS and although the measurements are correct, due to some shrinkage the knobs would not fit without acetoning the inside of it. Worked surprisingly well!
So depending on chosen material you may want to test fit before printing a bunch of them. Just print 1 and abort the print at approx. 3 - 4 mm height.
If it's to tight in your case, just print it slightly larger or adjust the design.
Let me know how it worked out for you! :-)
Print Settings
Printer:
Anet A6
Rafts:
Yes, but you can choose otherwise.
Supports:
No
Resolution:
0.2
Infill:
25%
Notes:
Printed in ABS, 25% infill with 1,6mm wall thickness.
No support needed, although the underside will be somewhat rough so you may want to choose otherwise.
Category: Replacement Parts