1 / 4
Speaker enclosure for Dayton PS95
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small enclosure for a Dayton PS95 driver. 5x5x5 inch cube.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 144
- Makes
- 0
- Views
- 1,047
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
Small enclosure for a Dayton PS95 driver. Approximately 2L volume with a port 17x87mm. Tuned to 58Hz, results in fairly flat down to ~150Hz, then a -7 dB step down to 50Hz. Sounds surprisingly great for how small it is, especially if you can EQ a bit of bass boost to help with that drop off. Cube is 130mm on each side, just over 5 inches. Holes in the rear for binding posts are 6mm diameter, I used Dayton BPA-38SN HD. This requires drilling the hole out with a 17/64 bit to get a perfect fit.