1 / 3
Blast gate for 42mm O.D. push fit PVC tube — image 1
1 / 3

Blast gate for 42mm O.D. push fit PVC tube

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Inspired by PeterH1500 who designed a 100mm blast gate. 42mm O.D. PVC tube redesign.

Rating
0 / 5
Likes
7
Downloads
26
Makes
0
Views
688
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

A redesign / remix of the 100mm blast gate by PeterH1500.  I originally scaled down his model to suit 42mm PVC push fit tubing.  This worked but resulted in very thin walls.  I therefore decided it would be a good CAD learning exercise to follow his design in Onshape and produce one with the correct dimensions but thicker walls.  I also combined 2 blast gates to provide a two way system with a simple cross beam linkage. I included connecting tubes printed in TPU and a Tee piece to join the blast gates together.  I made the lever arms a little bigger and printed these at 30 degrees to the bed for extra strength as the square drive tends to break if printed upright.   I use Esun PLA+ for all parts and printed using Cura with Tree supports on an Xvico X3S.

Tags