BAMBU X1C LED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added the thickness of the glass limit frame, Lift the wire port and change it from the right to the left Lower the slop
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 323
- Makes
- 2
- Views
- 6,261
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Modified content:
--Added the thickness of the glass limit frame .In addition, it is recommended to stick EVA foam with a thickness of 1-1.5 millimeters to prevent resonance noise.
--Change the power cord outlet to the right side and slightly increase the height.
--Lower the slope position to make it more in line with the fuselage
--Added 8 7X3 magnet holes at the bottom (However, the actual effect is not significant and can be ignored)
--Added gap for placing glass grooves(Avoid placing glass too tightly or unable to fit into the groove)
The overall height remains unchanged