Pool Skimmer Net Adapter for Gardena Combisystem
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.72 – €3.32 net (excluding VAT)
For file: Gardena combisystem to pool skimmer net - 1.2in 3cm handle_0.6n_0.3mm_PETG_MK3S_2h44m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.02 excluding VAT (range midpoint).
- Weight reported by the author
- 47 g
- Print time reported by the author
- 2.73 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapter to attach a standard pool skimmer net or brush to a Gardena Combisystem handle
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 294
- Makes
- 1
- Views
- 1,616
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
I was under the impression that all pool net skimmers have a standard size handle only to find out that mine is too large for the model that I initially printed (and remixed). I needed a much longer tube holder with a larger diameter. The skimmer net holder has a 3 CM/1.2 IN inner diameter and a total depth of 131 mm (104 mm after the pin holes). It can accommodate all my pool skimmer nets and brushes.
Because of the Combisystem connector, it wasn't possible to simply scale the entire model. I ended up splitting the original model in 3 parts (first cut under the Combisystem connector, second cut above the skimmer holes on the handle). I then scaled the middle section on the XYZ planes to reach the required diameter and depth. I scaled the tip on the XY planes only, this was required to avoid having super elongated holes on the handle. All this was done in Prusa Slicer! The model fits by just 1 mm on a Prusa MK3/S+.
I printed the model with black PETG and a 0.6 nozzle.
This is a remix of the GARDENA Combisystem to Intex model by Geweldich.