Nest Thermostat Wall Blanking Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a wall blanking plate for a Google Nest Thermostat version 3.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 71
- Makes
- 0
- Views
- 953
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
This is a wall blanking plate for a Google Nest Thermostat version 3.
It covers the hole and wires that are left exposed after the thermostat has been removed (to be moved to the desk stand for example).
The plate is a friction push fit onto the original Nest wall Trim plate.
After removing the thermostat, refit the Nest trim plate using the original screws (I have included an STL file for two spacers to use with the screws if they are too long without the thermostat.
The cover should just push on with a friction fit over the four small plastic standoffs and the centre hole of the original trim plate.
I have only tested it with the Nest thermostat mk3 version.
Print instructions
Category: Decor Summary
This is a wall blanking plate for a Google Nest Thermostat version 3.
It covers the hole and wires that are left exposed after the thermostat has been removed (to be moved to the desk stand for example).
The plate is a friction push fit onto the original Nest wall Trim plate.
After removing the thermostat, refit the Nest trim plate using the original screws (I have included an STL file for two spacers to use with the screws if they are too long without the thermostat.
The cover should just push on with a friction fit over the four small plastic standoffs and the centre hole of the original trim plate.
I have only tested it with the Nest thermostat mk3 version.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
</div>Rafts:No
Supports:
No
</div>Infill:20