Vase Mode Planters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are small planters, printable in vase mode. Inner Diameter around 120mm and height around 100mm
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 422
- Makes
- 9
- Views
- 1,470
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
These planters can be printed in vase mode, they have a inner diameter of 120mm (reduced by the double wall thickness) and a heigth of around 100mm. I reccomend printing with 0.8mm Wall thickness which works perfectly with a 0.4mm Nozzle. I also used 4 bottom layers to get the planter water tight and rigid at the bottom as there is no structure. They are quite rigid because of the shape.
You can use these models as you like just mention me if you use the publicly. Also try make your own in fusion 360 its super quick and easy by using the sweeping operation on a straight path perpendicular to the sketch and using the additional settings such as rotation.