Modular Rode USB-Mini Desktop Stand
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.26 – €1.54 net (excluding VAT)
For file: 50mm_extender_03mm_petg_mk3s_1h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.40 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 1.48 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
If you want to raise the mic closer to your mouth, but you do not have a stander, you can do it with this simple…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 57
- Makes
- 1
- Views
- 680
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
If you want to raise the mic closer to your mouth, but you do not have a stander, you can do it with this simple design.
There are 50mm and 100mm sections that you can screw together.
The thread (ANSI 5/8-27 UNS modelled in Fusion 360) fits well with the mic, but between the printed parts fairly tight, so I used first the adapter screw which comes with the mic to clean up the bottom thread of the extenders and a little grease (the one that you got with your printer works well) to be able to screw them together more easier. After you screwed them together a few times it goes easier.
I am using 4X100mm adapters and I find it still stable enough.
The design is hollow to spare material and printtime, but still rigid.
Print instructions
I have enclosed the 3mf files where you can see that I used variable layer heights.
0.3mm for the main body and 0.15mm for the threads.
Infill is 100%, no support needed.