Jordan jumpman 23
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
First we made a constraint box the size of the measurements we had and extruded it. We got the measurements by using the asf and dsf formulas.
Then we outlined our image to get the dish of the jordan and have it sitting inside something. We then outlined the Jordan drawing we made and used offset entities to make an outer layer of the drawing. This was the drawing
We then extruded the 23 and made it have a cool 3D effect. We then did that for the Jordan logo too and had us done with the design part. Also we did the small nike logo in the middle to which was annoying to do
We then used the boss extrude feature to get the jordan and the 23 to pop out of the dish which made it have more depth. When we did this the nike logo got covered up so we had to go back and extrude that too.
And this is our final design and all we had to do was save all the parts as their own 3mf files and print them all out.
