1 / 8
Shabbos Lamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Standard Digital File License
Shabbos Lamp
The regular Shabbos Lamp costs close to $60.00 on Amazon, this 3d print will keep it at around $15, including all the parts.
It also turns on and off with a switch on the wire.
Overview
File 1: The top/cover. With a cooling hole.
File 2: the bottom/base. With a hole for the wire and space for the lightbulb mount.
Print settings
Black PLA
- 20% infill
- No brim(unless needed)
- Supports
Strong, no light goes through.
Other colors
- No Brim(unless needed)
- Supports
- Infill 20-100%, when printed with dark blue PLA filament at 50% infill and the light went through, if you are doing a color other then black then do A infill and test it before to make sure it blocks out the light.
Links
Light Bulb Holder: https://a.co/d/5P8qrQw
Light Bulb Wire: https://a.co/d/glguoAf
Light Bulb: must be below 4 watts, the plastic will probably warp if it gets too hot.
Assembly
- Remove all of the supports from the cooling and wire hole.
- Put the exposed end of the wire through the wire hole.
- Attach it to the light bulb mount, you may need to strip a bit of the wire covering.
- Put in the light bulb mount, if it does not fit put a bit of electric tape around it.
Other info
Please leave a comment with any questions.
Ask your local Rav before printing being that the original Shabbos lamp may be patented.