1 / 5
Playseat challenge pedal frame center pieces — image 1
1 / 5

Playseat challenge pedal frame center pieces

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clamp these pieces on the tubes where the pedal frame is connected to the seat's frame and it will stay centered.

Rating
5 / 5
Likes
19
Downloads
116
Makes
1
Views
937
Reviews
1

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Share Alike

Why

The hinges of the Playseat challenge are a bad design. They move from left to right. These pieces keep them in place.

Printing instructions

I printed in PLA+, but PETG would be better as it's more flexible. Print it standing up with a layer height of 0.2 or more and use a brim.

Assembling instructions

Center the pedal frame against the seat frame. Make sure the hinges are pushed to the sides of the pedal frame as far as possible. Then just push pieces on the tubes until you hear a satisfying click.