1 / 3
Alternative TTGO T-Beam OLED front for SoftRF Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified OLED front to allow for more rectangular inexpensive 0.96" OLED boards
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 31
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Modified OLED front to allow for more rectangular inexpensive 0.96" OLED boards
Print instructions
Category: Parts Summary
Modified OLED front to allow for more rectangular inexpensive 0.96" OLED boards
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
</div>Rafts:Doesn't Matter
Supports:
Doesn't Matter
</div>Resolution:0.1
Infill:
15%
</div>Filament:
Unknown PLA
Notes:
0.3mm nozzle (since that was the diameter I used printing the original lettered part…)
Cut away some plastic either side of the corner stubs to allow for sliding the OLED board beneath the frame that clips onto the Rear part.