Another Trash & Recycling bag dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made my own Trash & Recycling bag dispenser that you can screw on the wall or on a door.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 242
- Makes
- 0
- Views
- 923
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It comes in four sizes. Outer diameter 70 or 65mm. Single or dual version.
This is a simple Trash & Garbage bag dispenser. I didn't find any one that had the kind of monting options I wanted.
The design is simple but sturdy and is created to print without support and it fits a roll of small garbage bags which is 100 mm wide and has a diameter of 55 mm.
There are mounting holes to screw the holder to the wall. The mounting holes is designed to use Pan-Head screws. When I was mounting it on the inside of a door I used Pan-Head 4x16 mm
Print with 3 perimeters on a 0.4 mm nozzle. No supports are needed for this print.