Phone Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Engineered curvy device stand with a unique support structure and triangular pattern.
- Rating
- 5 / 5
- Likes
- 74
- Downloads
- 603
- Makes
- 1
- Views
- 4,008
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A modern twist to a device stands with an engineering support method. It incorporates a triangle pattern for the back structure and an indented storage section at the base.
As the model is designed to have a floating effect, the model does require support. The model was printed with the ESUN Magic green and blue filament with the brass nozzle at 230 degrees.
Dimensions
Width: 70mm
Height: 120mm
Depth: 100mm
Viewing Angle: 50 Degrees
PRINT INSTRUCTIONS
Can be printed horizontally or vertically, depending on preference. The model was printed on the side as shown in the pictures below
Printer File No.:1× print file
Support: Internal Support between curves
First Layer: BED 70 Degrees. Nozzle: 230 Degrees
All other Layers: Bed 60 degrees. Nozzle: 215 degrees
INFILL: 15%