Lighted Christmas Star
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.65 – €4.47 net (excluding VAT)
For file: christmasstar_035mm_pla_mk25smmu2s_4h6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.06 excluding VAT (range midpoint).
- Weight reported by the author
- 50 g
- Print time reported by the author
- 4.1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
After searching the internet for a Christmas Star tree topper with color LEDs without any luck, I decided to design my…
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 136
- Makes
- 1
- Views
- 795
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After searching the internet for a Christmas Star tree topper with color LEDs without any luck, I decided to design my own. The model is one half of a shell that can hold some LED lights. I used Wondershop multicolor LED dewdrop lights 30 count from Target. The lights only consume 150mA. I removed the controller and battery box and replaced it with a small DC/DC converter set for 3.0V output. The converter is powered with a very small 9VDC wall plug. Drill the holes on one side only to 2mm for a 2mm screw.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/6jL1cVgB3HS.