1 / 4
Incline Bowl Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A appliance to incline the bowl for your pet, so it can't push the food over the bowl.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
There are two version from this IBM: One with an inclination of 16 to 22 degrees and one with 23 to 29 degrees.
The difference between these, are the lengths of the hooks and the inclinations of the cutouts from the base frame.
The assembly is very easy by clipping the individual parts together. (look at the picture above)
The bowl in the picture is up to 139 mm x 139 mm.
All parts are PLA and I printed with 0.16 mm layerthickness and 20% infill.