Parametric corner brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Strong corner brackets that can be adjusted in wall thickness, hole spacing and hole diameter
- Rating
- 4.889 / 5
- Likes
- 373
- Downloads
- 856
- Makes
- 11
- Views
- 2,672
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I was looking for corner brackets and found the great design by 3D Workspace (https://www.printables.com/model/113989-corner-bracket-optimized-for-3d-printing), however it didn't fit the dimensions I was looking for. So I decided to completely overengineer a solution and came up with this parameterizable design.
There are two versions: One for button head and one for countersunk screws. Please shoose according to your use-case
The included Fusion files are a bit of a mess, but the follwoing values can be changed:
- Hole spacing: The distance between the center of the hole and the wall
- Hole Spacing: Metric values. Offset for through holes is added. For countersunk screws the sunk bit is adjusted as well
- Wall thickness: includes the thickness of the contact area and the strengthening bits
For the supplied stls the hole diameter and spacing are given in the file name (M4x20 = hole for M4 screw with a 20mm spacing)
It is possible to print the brackets standing up. However, this creates a structural weakpoint near the screw hole. If you are after maximum strength you will want to print it laying on it's side. It is a bit trickier to print, but all overhangs are <45° so it should be possible with pretty much any printer.