Honeycomb General pourpose containers (deep and short)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Container with two angled slots (around 100mm deep and 50mm short)
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 304
- Makes
- 6
- Views
- 831
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A couple of Containers with two angled slots, you can use also for pencil or other narrow tools.
Deep version (around 100 mm deep)
Short version (around 50mm deep)
Printed in green ABS on Bambu Lab X1C, but you can print in any material you want.
Printing informations:
The best way to print the container is upside down (see picture below)
I printed green ABS on Bambu Lab X1C, 0.2 Layer, 261°C; 3 Walls: No Infill; Support Yes; 6 bottom layer; 6 Top Layer; Fan 0%; Standard speed
See my settings for support in the picture below, will help you to remove support easily.