1 / 5
Tiny Magnetic Corner Clamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To hold parts of laserct models in a 90 degree angle while the glue dries. E.g. walls of house models.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 289
- Makes
- 1
- Views
- 1,438
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To hold the walls of model houses in a perfect angle of 90degree while the glue hardenes out I use 4 of this clamps.
I used neodymic magnets in different sizes, so I changed the model a bit for each size. For each clamp pair you need four identic magnets.
I found in my drawers neodymic magnets with size
- 3mm thick, 5 mm diameter
- 20mm x 4mm x 2mm
- 14mm x 4mm x 2,5mm