1 / 5
Endstop holder for S9; Halterung für Endschalter für S9
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting/ Holders for endstops of the X- and Y-axis
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 48
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Endstop holder for Standard version of an Sculpfun S9.
There are 2 Holders, one is For the X-Axis one for the Y-Axis.
You need additional:
- Tool for M3-Threadcutting; or use an M3-Screw and cordless screwdriver and it onto the Hole while turing until the screw gets hot to form the treads.
- These Endstops, which are the same as the Orginal Endstops by Sculpfun https://www.amazon.de/dp/B09WXPHDRL?psc=1&ref=ppx_yo2ov_dt_b_product_details
- Screws DIN 912/ ISO 4762:
- 4x M3 x 6 (for mounting Endstop-PCB onto holder)
- 4x M3 x 8 (for mounting Holder onto frame)
- 2x Washers DIN 9021/SIO 7093 for Y-Holder
- 2x Waschers DIN 125 / ISO 7089 for X-Holder
- 4x Hammerhead nuts for 6mm T-Slot, M3:
https://www.amazon.de/dp/B09Y85JSXY?psc=1&ref=ppx_yo2ov_dt_b_product_details