High flower bed rooftop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
This is a simple rooftop made out of plastic tubing (fi16mm) for electrical cables.
Material: PETG
Perimeters: 4 - 0.6mm nozzle
Infil: Gyroid - 20%
Layer-hight: 0.32mm
These are the settings I used but feel free to experiment. Just keep in mind that the bend tubes will put some force on the fittings when bent. So don't make the walls too thin and maybe adjust the printing position of them so that the vertical parts of the fittings lie flat on the bed. Otherwise, I recommend reducing the layer height because of the delamination.
After printing, I joined the tubes and the fittings with some self-tapping screws (see pictures).
Hinges are optional, clip 2 can be used instead, this enables you to open the roof from both sides.