Screaming Donut
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.48 – €1.81 net (excluding VAT)
For file: Halter_0.2mm_PLA_MK3S_1h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.64 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 1.72 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A very old toy recreated
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 53
- Makes
- 0
- Views
- 453
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the recreation of a very old toy I used to make as a little boy. I “stole” a large clothing button from my mothers sewing basket, and added a piece of string. Spinning around the button until the line broke….
The modification I made now is to integrate a whistle and/or screaming sound.
Printing is straight forward. Do orient the models correctly on the build plate, and configure your desired settings for supports. I have designed 3 1.8 mm holes, in an asymmetric pattern, for alignment during glueing. That is why there are 2 .stl models. Use it by putting in small (approx 4 mm) pieces of filament.
I also uploaded the Fusion 360 file so everyone can experiment by changing sizes and/or holes.
Please share your results. I am very interested what sounds you can generate.