Kamera Halter für Fahrradträger am Wohnmobil / Camper - Camera Holder for Camper with bike-carrier
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.74 – €0.91 net (excluding VAT)
For file: Cam_holder_taster_faenger_v0p2_0.25n_0.1mm_PETG_MINI_1h14m_vd02.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.82 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 1.23 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Verstellbarer Rückfahrkamera-Halter für Fahrradträger am Wohnmobil / Camper # Camera Holder for Camper with bike-carrier
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 38
- Makes
- 0
- Views
- 1,556
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Für mein Wohnmobil habe ich eine Solar-Rückfahrkamera mit Funk-Übertragung besorgt ("AEG"). Da eine Kabellose Montage möglich ist und ich weder am Kennzeichenhalter noch oben am Wohnmobil die Befestigung für sinnvoll erachte, sollte sie an den Fahrradträger. Dies ist der hinterste Punkt, egal ob genutzt oder hochgeklappt. Der Verstellwinkel der Kamera an sich ist aber zu klein um beide Zustände abdecken zu können, also musste etwas besseres her. Hier die Lösung:
#Achtung: mein Fahrradträger hat einen Rohrdurchmesser von 30mm, dafür ist er ausgelegt!#
Für die Montage braucht man 2 Linsenkopf-Schrauben 4*35mm, 2 Schmelzgewindeeinsätze M4 und einen 4mm Metallbohrer zum Bohren der Löcher in den Fahrradträger (Vorbohren mit kleinerem Bohrer empfohlen).
Den Schraubfänger/ Gleiter zweimal drucken - ich habe diese Teile mit 0,25-er Düse, Infill 100% und Bügeln gedruckt (0,4 geht auch, aber eventuell muss man nachschleifen damit sie beweglich sind). In die Schraubfänger (z.B. mit einem Lötkolben) die Gewindeeinsätze einschmelzen und danach die verformten Seiten (s. Foto) mit der Feile wieder plan schleifen.
Da der Schiebeschalter auf der Rückseite der Kamera nach der Montage nicht mehr erreichbar ist, gibt es den "Taster" - auch mit 0,25-er Düse, Infill 100% und Bügeln gedruckt (0,4 geht auch). Auf dem Taster gibt es eine on =1 und off= 0 Markierung, damit man weiß was man tut - denn eine Anzeige hat die Kamera selbst nicht.
Den Korpus habe ich mit 0,4-er Düse, gesamt-Infill 20% gedruckt. Alles in PETG (Prusament).
Die Kanäle für die Gleiter habe ich allerdings mit mehr Infill (100%) verstärkt und rings um die Schraublöcher auch.
Die 3mf-Dateien für meinen Prusa Mini+ hängen an…
Das war's schon: have fun and keep on printing!
##english version: #####################
For my Camper I wanted a rear view cam. The used Cam (AEG) is a solar powered cam with accu an wireless connection to the Screen. It is completely wireless and I guess the best position to install it would be the carrier for the bikes. The cam is a little adjustable itself, but not enough to get the right angle for the two positions needed: bike Carrier in use oder unused. So I wanted an additionally adjustable mounting on the bike carrier.
The pipe of my Bike Carrier has a Diameter of 30mm, so it will only fit for this size!
For installation you need two lens head screws 4mm*35mm, 2 threaded inserts M4, a metall drill 4mm for the two holes in the Bike Carrier pipe.
You need two of the small sliding parts and one switching-helper - because after installation the on/off-Switch is unreachable. This parts I printed in PETG Prusament with 0.25 Nozzle, 100% Infill and ironing - but 0.4 nozzle and without ironing works too. After melting-in the threaded inserts, you have to file the slider until it can slide again, because the melting process deforms the slider a little - see picture… On the switching-Part is a "1/0" text, because on the cam itself you can't see if it is turned on or off: this should be readable from the Camera side!
The korpus I printed PETG Prusament with 0.4 nozzle, main infill 20%. To strengthen it, I added modifikations with 100% infill for the sliding channels and the screw-holes.
3mf for Prusa Mini+ are attached!
Have fun and keep on printing!