1 / 11
8up Shotgun Shell Caddy — image 1
1 / 11

8up Shotgun Shell Caddy

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

UPDATE 4/18/2017 I have gone through a couple revisions of this. The current version is rev3, which is making much…

Rating
5 / 5
Likes
7
Downloads
35
Makes
1
Views
617
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

UPDATE 4/18/2017

I have gone through a couple revisions of this. The current version is rev3, which is making much better use of space and leaving a much smaller footprint. I also uploaded the .iges files so if anyone would like to modify them they can.

This is my try at a shotgun shell caddy, as used by many multi-gun competitors. This is not to be used for commercial purposes.

You will need:

8 - M4x20mm Machine Screws

8 - M4 Nuts

4 - 1/2"x 1/16" magnets (http://www.kjmagnetics.com/proddetail.asp?prod=D81-N52)

1 pack of rubber bumpers (http://www.mcmaster.com/#9310k12/=13rn8to)

1 TekLok mount (if that is what you want to use)

Super Glue

3D Printed Parts:

Material: ABS

One of each: 8_up_body, 8_up_front, 8_up_back

Layer Height: 0.2mm

Infill: 30%

Shell thickness: 1.0mm

Bottom/Top thickness: 1.0mm

Instructions:

  • Print the parts.
  • Press the M4 nuts into the slots, you may need to use a hammer and a punch to tap them in to place.
  • Glue the magnets into the 8_up_front part, allowing each one to dry before you put the next in, otherwise it can easily be pulled out by other magnets or metal parts.
  • Install the rubber bumpers by pulling the small ends through the holes in the 8_up_back part
  • Mount the 8_up_front and 8_up_back to the 8_up_body. You want the magnets and the fat ends of the rubber bumpers facing in (each side with the “shelf” for the shells to sit on). The 8_up_body will be oriented so that the side with the counter-bore slots is facing down.
  • You will likely need to adjust the ends so that it will hold the shells correctly.

I will be working on other versions of this, but this is it for the time being.

Print Settings

Printer Brand:

LulzBot

Printer:

TAZ 5

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

30

Category: Sport & Outdoors

Tags