Desk Tidy Tub VaseMode
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A place for your pens and other small desk items.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 58
- Makes
- 2
- Views
- 270
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Settings
Theses are the main settings to Change if your Using Simplify3D
These give me extra strengh in the print as the line width is 2x the size of the 0.4 nozzle.
Under Layers Tab
Infill 0%
Primary layer Height 0.2800
Top solid Layers 0
Bottom Solid Layers 3
Outline/Perimeter shells 1
And put a tick in the box for Single Outline Corkscrew printing mode (Vase Mode)
First Layer Height 100%
First Layer Width 100%
First Layer Speed 50%
Extruder Settings
Extrusion Multiplier Set to 1.10 (This compensates for the extra line width.)
Extrusion Width 0.80mm ( Extrudes 2x the 0.4mm nozzle width.)
Speeds
Default Print Speed 60.0mm/s
Outline Underspeed 50%
Speed Overrides Setting
Ticked Adjust printing speed for layers below 15.0 sec
Allow Speed reduction down to 70%