joints for fnaf figures
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
joints for fnaf figures
- Rating
- 0 / 5
- Likes
- 107
- Downloads
- 1,050
- Makes
- 0
- Views
- 4,843
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These elements are used to mount in the animatronic interface that you will find on my profile.
In magnet mount v1.stl you paste the magnesium and you paste it into the given part in the animatronic.
body conector 1.stl and arm conector 2 x2.stl are glued together after they are recorded in the aniatronika body.
elbow part 1.stl and elbow part 2.stl should be glued in the animatronic's hands after assembling.
You paste hip.stl directly into the animatronic body
All magnets need to be pasted
Don't be afraid to use glue
I used 10x5mm neodymium magnets to connect the joint base with the magnet mount
Each animatronic requires a different amount of magnets
Neodymium magnet 10x5 https://elektronika-sklep.pl/elementy-mechaniczne/magnesy/magnes-neodymowy-10x5mm
An insert must be pressed into each joint base
M3x8 countersunk head screws
Insert M3x4mm https://pl.aliexpress.com/item/1005004629314742.html?spm=a2g0o.productlist.main.7.2313XUUBXUUBKz&algo_pvid=bde759e1-795d-4f8c-bb9f-bb180f913178&aem_p4p_detail=202306220211496035469512709230005902811&algo_exp_id=bde759e1-795d-4f8c-bb9f-bb180f913178-3&pdp_npi=3%40dis%21PLN%2146.73%2117.09%21%21%21%21%21%402100b1a616874251093416894d0783%2112000029896431147%21sea%21PL%210&curPageLogUid=jsWZ4wZcP6ZH&search_p4p_id=202306220211496035469512709230005902811_4