IKEA LACK Storage bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Storage bin for ikea lack.
- Rating
- 3 / 5
- Likes
- 19
- Downloads
- 85
- Makes
- 2
- Views
- 622
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
It's a storage bin to clip on the leg of the ikea lack coffee table(or any table that has 50x50mm legs).
Use to store your 3d printing tools like a filament cutter, glue stick, and scraper.
I recommend printing it with PETG because you'll need to spread the mounting clip when installing it. Printing it with PLA would also be fine but you'll probably need to flip the table and slide it in unless you want to risk breaking the mounting clip.
Installation
Hold the piece at these 4 points using 2 hands and spread it out, then clip it on the table leg.
#Optionally you can also use 2x m5x20 self-tapping screws on the side for extra weight capacity, but just the clamping force from the clip alone would be enough for most cases.