Magnetic bottle opener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A magnetic bottle opener that can be hanged under a table, for example.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 98
- Makes
- 0
- Views
- 668
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
A magnetic bottle opener that can be hanged under a table, for example. Most of the time there is a magnetic strut or something similar under the plate, so you always have it ready to use!
It is made for 4mm x 7,5mm round magnets, but you you can adjust the holes for your magnets in the STEP file.
Don't forget to put in an 5 cent coin!!! :)
The front contour is Similar to the PRUSA BOTTLE OPENER
https://www.prusaprinters.org/prints/6-prusa-bottle-opener.
The icon on the Handle is from:
https://icon-icons.com/icon/beer/69420
Print instructions
I printd the middle part in PETG with 30% infill, 6 outlines and 0,2mm layerhight. I haven't tested PC on it yet, but i think it is also a good choice.
All the other parts are printed with PLA and normal settings,
about 0,1mm layerhigt. Glue the parts and the coin together with superglue!
Happy Printing!!!