Customizable Hair Clipper Guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Customizable Hair Clipper Guard for 45mm head width clipper.
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 469
- Makes
- 1
- Views
- 2,964
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Customizable Hair Clipper Guard for 45mm head width clipper.
Should print even without supports (with some imperfections below two side flaps like things).
Fins could be printed with one perimeter 0 infill, minimum 0.5mm wall thickness, base plate should be solid, >60% infill. Size 44mm guard tested with PLA, nozzle 0.5mm, layer 0.25, default parameters in SCAD file.
You can use a "jet lighter" or small torch to soften the print sharp edges. Also may be useful to slightly soften plastic and shape it to make a perfect fit with the clipper head.
I have borrowed base plate from benswanson4 model www.thingiverse.com/thing:406513.
How to use: Download all files to the same folder, use OpenSCAD to generate your own clipper guard.