Wallet - 8 cards + Bill clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed flat on the build plate then once completed folded over onto itself so that the door clips shut.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 70
- Makes
- 1
- Views
- 1,212
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
This wallet was designed to hold around 8 cards and a few bills. It is printed flat then the cover is bent over using the living hinge and snaps closed. Two separate sections make this easy to organize your cards. Store up to 6 cards in the slide in portion and then one or two cards on top for easy access (ID and credit card). Once printed, slide a small razor blade under the bill clip to separate it if it sticks.
I have printed this in PLA, PETG, PA-CF. You may need to heat the hinge while bending if you use PLA as its not as flexible as the others.
Its not a complicated model to print but here are a few recommendations:
- Print the first layer very slow if doing the TOPO design and slow down your accelerations for this layer. The topo design needs to be printed in one layer. Bambu lab has an easy tool to paint which lines you want what color. I am sure other slicers have the like. I recommend adding your phone number on the inside because you have an awesome 3d printer and can do custom things with it :)
- Let the bed cool completely before taking the model off, its very thin and if the bed is still warm the print will warp!
- I was able to print successfully without supports but if your printers bridging isn't great, I would recommend supports under the clip and the clip receiver (blue circles). DO NOT use supports in the bill fold section as there is a one layer gap that acts like a support interface, if you use supports here it will bond together.

- I recommend printing at 100% infill. With supports its only 31 grams of plastic so its a good end of spool print.