1 / 3
RadMini 4 Second Battery Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Midframe mount
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 450
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Allows for the mounting of any common ebike battery tray (reention, hailong, polly, etc) to the folding tube while still retaining the ability to fold up the bike.
Print 3 copies, use M5x45mm screws and M5 heat inserts (4 per clamp, 3 for attaching bolts and one for the battery tray). Print in something that will handle outdoor exposure and with lots of perimeters and high infill.
(Note: the second photo was a test fit with the only long M5's I had on hand @ 50mm which was too much, 40mm does work, but I think 45 would be best. YMMV)