1 / 3
Stackable Shoe Rack (metric version)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Side panel to construct a (stackable) shoe rack from 18x200mm wood boards. Fits exactly on an MK3(S) printbed.
- Rating
- 4.944 / 5
- Likes
- 752
- Downloads
- 1,968
- Makes
- 25
- Views
- 13,582
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Side panel to construct a (stackable) shoe rack from 18x200mm wood boards.
Fits exactly on an MK3(S) printbed.
The model is customizable on OnShape via variables.
This is a re-model for metric wood boards of the original: https://www.thingiverse.com/thing:4676909
Print instructions
- PETG
- 9 perimeters
If you're printing on an MK3/4: Since this just fits on the printbed you need to:
- Disable skirt
- "Place on Face" on the "backside" (i.e. so that the cutout is towards the front of the bed)
To get the open honeycomb look:
- Zero top / bottom layers
- Infill:
- Honeycomb, 5%
- Infill angle: 0º