1 / 2
Test 6 with Iglidur i150-PF filament
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the 6th test of a series with the filament of Igus: Iglidur i150-PF. https://www.igus.eu/product/12404.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 366
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
This is the 6th test of a series with the filament of Igus: Iglidur i150-PF. https://www.igus.eu/product/12404.
I tested the first layer as a follow up from test 5. This time I used 3DLAC on my steel sheet.
- I changed the 'minimum travel after retraction' from 0.5 to 1 mm
- I increased the first layer height with a 0.03 mm
It looks better. But as Niklas continued to advice to dry the filament, I will do that next.