Mark 5 Dive Helmet Coaster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drink coaster featuring a stylized image of the vintage Mark 5 dive helmet. Made these for our little dive club.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 65
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Drink coaster featuring a stylized image of the vintage Mark 5 dive helmet. Made these for our little dive club in Southern Saskatchewan. Can't drink from your genuine Saskatchewan Seal Skin coffee mugs without a coaster. That would be uncivilized.
I am using the same color change methodology as every other coaster I have put together.
V1.1 has the aquaholics text removed.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20% Triangular
Filament: Filaments.ca ecofil PLA Red, orange,black, silver and white
Notes:
Sliced with simplify3d making sure first layer height was set to .2 mm and then edited the gcode with notepad++ to add m600 colour change codes at 1.2 mm, 2.0 mm, 2,8 mm, 3.6 mm and 4.4 mm. If you don't want the logo a different colour you can omit the first two changes.
Search the gcode for ; layer 6, Z = 1.200 ; feature inner perimeter G1 Z1.200 F1000
Then add this right after. ; colour change M600
Of course not all machines will recognize an m600 code so ymmv.
Category: Kitchen & Dining