Valve Index adapter for VIVE Facial Tracker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple peice that you can glue or stick with double sided tape at the bottom of a valve index. Unscrew the tracker…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 171
- Makes
- 0
- Views
- 878
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple peice that you can glue or stick with double sided tape at the bottom of a valve index.
Unscrew the tracker form the VIVE Pro (Eye) mount, and screw it in place. You may want to fiddle with the angle to get best results.
You will need a bolt, I haven't measured the threads. If you don't care about preserving the VIVE Pro bracket that comes with it you can break off the part with the threaded insert.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
300
Infill:
20
Filament:
PolyMaker PLA
Notes:
Re-orient the part so the flat base is on your bed. (Will update the file later so it's the right way up by default later)
Category: Computer