Top Bowden Guide for Dagoma DiscoVery/DiscoEasy 200
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sometimes, my bowden tube tended to catch on the left side of my printer. I had 2 solution : Don't route the tube…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Sometimes, my bowden tube tended to catch on the left side of my printer. I had 2 solution :
- Don't route the tube between the tom smooth rods on the top of the machine
- Design a part that prevent this from happening.
So, Here is the larger circle you can fit between the 42mm gap between the 2 8mm rods. Enjoy!
De temps en temps, le bowden tube de mon imprimante s’accrochait sur le pilier gauche. J'avais 2 façon d'éviter ça :
- Ne pas passer le tube par la partie haute de l'imprimante
- Designer et imprimer une solution pour l'empercher de bouger
Du coup, voici une pièce très simple avec le plus grand cercle qui tien proprement dans l'espace de 42mm entre les 2 barres. Si ça peut vous servir! ;-)
Print Settings
Printer:
Dagoma Discovery 200
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
100%
Notes:
I recommend using a brim.
Just draw the profile in Fusion 360, extruded it, draw a hole on top, punched through it and added some fillets.
Category: 3D Printer Accessories