Biqu H2 carriage mount for cr10 smart
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I upgraded my Cr10 smart to have a H2 and I created the mount for it because I didn't see anything else posted for it.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 70
- Makes
- 1
- Views
- 628
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I upgraded my Cr10 smart to have a H2 and I created the mount for it because I didn't see anything else posted for it. I made this so that it has a channel for cable routing and management. You can route your cables behind the H2 and through the channel. Its wide enough to also accommodate the heater cartridge so that you don't have to pull the cables out through the other end. There is easy access to most of the screws but I do suggest putting the top screw down for the H2 before mounting for easy assembly. You will need longer screws than the stock screws that came with the cr10 smart. Printed in abs but will also work with PETG.