1 / 5
Flip Scoreboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy print flip scoreboard
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 132
- Makes
- 0
- Views
- 968
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
All parts are very easy to print. Most parts are replaceable for different scenarios.
- Overall size 220x115x150 mm (LxDxH).
- For the rings, you may want to use steel key rings instead of the ring.stl I provided. If you don't have any steel key rings you may consider using my ring.stl and then use a soldering iron to close the ring after putting it through all the number plates. I would suggest ring inner diameter of 26 mm. A ring too small may cause difficulties to flip the numbers. The last option for the ring might be cable ties.
- For the stand, you will need 6 nos. of M3 heat inserts and 6 nos. of M3x8 screws. This stand is not very strong since I would like to save some filament. Looks weak but quite enough for me.
- For the number plates, you may consider using multiple extruders or simply paint them as I did.