HEVO Z axis anti-wobble bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My z-motors when attached to the HEVO frame aren't exactly vertical and rattle when the bed is moving up and down. You…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
My z-motors when attached to the HEVO frame aren't exactly vertical and rattle when the bed is moving up and down. You will need 2 608ZZ (8x22x7mm) bearings and they are a tight friction-fit.
Initially I made the smaller version which was fine with the original, shocking bad tolerance, parts. But, once i reprinted them properly the bolt head got in the way. I could recess the bolt but then there wouldn't be much plastic left. So decided to my take on a flying-buttress bracket, I know it isn't but what the heck ;o)
Small version has been printed and is fine, large version has yet to be printed
Print Settings
Supports:
Yes
Notes:
Print upside down to the model, so the large flat portion (the top) is on the bed
Category: 3D Printer Parts