Reused glass bottle conveyor / raceway
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Expandable manual conveyor for reused 1-quart glass bottles, offering effortless organization and easy access.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
There's a lot of different products that use a certain 1 quart glass bottle, as shown in photo. These bottles are usually reusable and quite durable. We use a lot of these at home to store various drinks we made.
However store these bottles is a bit tricky. We have a limited space kitchen cabinet, and these bottles do not stack (of course). So we came up with this conveyer / raceway, so we could store them in some deep and low-clearance cabinet and make the depth work for us.
This design features a U-shaped conveyer so you can push a washed bottle in one side and the rest pops out from the other side. There are 3 main parts, the U-bend piece, the connecting piece, and an end piece. You can print multiple connecting pieces to expand the conveyor. The pieces are connected using a interlocking mechanism.
I've printed this with a 0.4mm nozzle and using 0.16mm layer. I believe the design is quite forgiving and should suit other parameters too. Support might be needed if you print it laying down.