Lexan/Polycarbonate/Acrylic Lamp base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Version 3 of the "Fortnite lampbase" i made for one of my kids. Lampbase that fit a RGB LED strip 150mm long, and…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 108
- Makes
- 0
- Views
- 498
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Version 3 of the "Fortnite lampbase" i made for one of my kids.
Lampbase that fit a RGB LED strip 150mm long, and lexan (glassv acrylic/plexiglass) max thickness 4mm.
The lampbase is 3D printed in black PETG top/bottom and transparent middle, any other material would probably be ok.
Lexan is cut/engraved on my CNC using 90 degree V-bit.( a dremel or similar tool can be used to make an engraving if you do not have access to a cnc of course.
No supports needed if printed in the orientation of the provided STL files.
Size of LEDstrip used are 150mm long, 8mm wide and about 2mm height.
I also connected an IR remote RGB controller on the outside of the base.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
10
Filament: Fiberlogy PETG Black and transparent
Notes:
If printed in the orientation of the stl files, no supports are needed.
Category: Other