1 / 3
BugBu 260 Bed mount MOD
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed to split the Cant Bed Mount to fit on a smaller build volume. Will fit a 120x120 build plate.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Split of the Cant Bed Mount to fit on a smaller build plate.
print in loaded orientation with regular supports touching buildplate. Glue with ca Glue and
use screws to locate and clamp. do not remove screws.
1.0 - added through hole and removed screw boss to make it print flat on the bed
2.0 - final. print in orientation that it loads with support. build plate only.