1 / 3
Grado Removable Cable Mod For Aftermarket Gimbals
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I love the Grado removable cable mod from Smolzilla Makes. So i made a remix that fits my aluminum gimbals.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 40
- Makes
- 0
- Views
- 707
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
Remix of Smolzilla Makes “Grado 3D Print Removable Cable Mod”
Please follow his excelent step-by-step assembly guide.
I had to remix the existing mod to fit my aftermarket aluminum gimbals, now you don't have to cut parts of off the gimbals.
This mod should fit the “Prestige”, “Reference” and “Hemp” series
- The adapter can be secured with the screws that secure the gimbals to the drivers.
- The wiring cover has to be glued in place, there just wasn't enought room for screws.
Make sure that the covers are facing inside.
- The room for the sockets will be very tight. You may have to bend the pins a bit to fit into the housing.