Crown with jewels - well scalable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A prop/toy crown designed for good scalability. Small by default, can go up no problem. STEP and Solidworks included.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 127
- Makes
- 1
- Views
- 498
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This crown is perfect for all occasions:
- Cosplay
- Toys
- When you accidentally buy an alcoholic panda from Ikea, then she proclaims your apartment as her kingdom.
- When, in turn, your pig plushy proclaims himself the minister of finance, and is hard to persuade ministers don't wear crowns.
- When your fiance needs to feel special.
The model is designed for good scalability. In other words, it's sturdy when small and can go up in size with no problem.
By default, the crown's diameter is Ø40 mm - bottom, Ø50 mm - top with 30 mm height.
Feel free to tinker with it further. I've provided STEP and source Solidworks files.
Print settings:
- All set up in the provided *.3mf file.
- No less than 0,1 mm layer height for 100% scale, 0,2 mm for 200%, etc.
- The model benefits a lot from adaptive layer height.
- Jewels are printed separately with similar settings. Best to use several colors. Get creative. Use your filament samples!
- No support is needed.
- Use glue for small jewels or a brim (pain to remove, glue preferred)
The filament used - PlastSpaw Light Gold PETG (Polish manufacturer). PETG is slightly recommended over PLA because the prongs will be way more robust.
Jewels - A mix of interesting stuff you have. I used PLA and PETG mixed.