Daewoo D500S and Balter food dehydrator modular walls for filament drying
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular walls to turn a Daewoo D500S or Balter food dehydrator into a filament dryer without having to cut the trays.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 36
- Makes
- 1
- Views
- 398
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
I recently bought my first spool of TPU (Creality brand) and it was extremely moist, right out of the box - its specs say that it can be printed at 210 - 240C and it was literally sizzling at 230C.
I found a barely used Daewoo D500S food dehydrator online with a very good price, but as it has a sort of rounded rectangular shape, I couldn't find any suitable food dehydrator extension walls that would have fit on it, but I didn't want to cut the trays as I still want to use the machine to dehydrate food as well.
As such, I measured the radius of all corners and sides (all four sides are a bit rounded), the length of the sides, and made this model, shaped after the form of the dehydrator's trays - I am EXTREMELY new to 3D modeling and it shows on the model, but it works perfectly.
The walls have a 3mm average thickness, they are 100mm tall and stackable to allow for drying multiple spools at once.
The overall internal measurements of the extension wall are the following:
Wider side (bottom portion - this slides over the edge of the dehydrator): 318 x 298 mm
Tighter side (top portion - this is the part over which the next level of wall/tray/lid fits): 314 x 294 mm
Corner radius: 64,6
Length radius: 391.5
Width radius: 320.7
As the model is quite big, I cut it up in four interlocking pieces using the piece in the splitter.stl file (then tinkered a bit with them in Meshmixer and 3D builder to thicken walls and bridge some gaps created by the very amateur splitting I did); besides the already split model I included a full, already split and an unsplit model.
Each wall took approx. 8 hours to print with 0.2 layer height (0.4 nozzle), 2 perimeters and 15% infill - printed them in PETG with no supports and a 3mm brim, on painter's tape on an Ender3 V2.
After the walls were done printing, I printed this belt in TPU and this buckle in PETG to neatly hold the four walls together (they are interlocking, but don't stay together very firmly) - this can be done also with a piece of string, but I wanted to experiment with TPU :)
Hope this will be useful for someone :)
Later edit: it seems that the walls fit the Balter Seco and the Balter Seco LCD dehydrators as well :).