MiniCaster Fret Button and Arduino Micro Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MiniCaster Fret Button and Arduino Micro Mount
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 68
- Makes
- 0
- Views
- 604
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Public Domain
Fret Button
MiniCaster Controller (linked in remixed model) - Had some fitment issues with the included fret buttons - not sure if it's my printer or the specific switches I'm using but I broke the button cross interface every time - the switch would split the cross in half. Hopefully this helps anyone else having this issue. The body button interfaces are a little larger and fit better. Measured for a switch with 1.25 mm x 1 mm thickness, 4x4 cross. These are the switches I used (pictured with original model): https://www.amazon.com/dp/B09J3GR5WD?psc=1&
This fret button is the top button in the picture with the Cherry MX switch.
Arduino Micro Mount
Simple mount for an Arduino Micro (measured for the official Arduino Micro board). Can be mounted on its side if the board has headers on it, I used double sided tape on the Arduino and on the bottom body for the mount.