Voron2.4_Prusa mk3s+ filament sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Was looking for a faultless filament run out sensor like on my Prusa mk3s+ units for the Voron2.4
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 517
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Was looking for a simple solution for a filament sensor for my Voron2.4 so took inspiration both my Prusa MK3s+ printers and how simple their design is and simple to construct.
Uses original Prusa printable parts fs-lever and adapter-printer.
Required are the stock Magnets (i used 2 x 10x6x2 magnets) and Ball bearing 7mm diameter as well as their optic sensor.
Set of magnets MK2.5S, MK3/S/+ | Original Prusa 3D printers directly from Josef Prusa
IR filament sensor | Original Prusa 3D printers directly from Josef Prusa
Heatserts I have used M3x3x4.2 qty 8 required.
Bolts
M2x6 socket head qty 1 for filament sensor, this thread is modeled so no heatsert required.
M3x6 socket head qty 2 hold top plate on
M3x10 socket head qty 3 to hold cases together.
M3 x12 cap head or socket head for the lever
This was printed on bambulabs 0.2mm layer using ABS but could be printed almost any printer at 0.2mm layer.
Have added the Inventor files , if you are able to open them these there are also an “iPart” with a Bowden version