Anycubic Kossel Linear Plus endcap with alternative foot attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An alternative foot design that reduces vibration.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I really liked the original remix that added holes for use with T-nuts (see the 'remixed from' link on this page for the main part) but there's little chance of buying hockey pucks in the UK. I thought I'd try an alternative foot attachment using a 'button' made of TPU in a specially designed holder.
There's little to add in the way of printing hints: use your favourite material for the attachment itself (I used eSun PLA+) and do whatever you think necessary to get a strong part. I used 3 walls, 3 top and bottom layers and 30% infill.
I used TPU for the button, again with 3 walls, 3 top and bottom layers, and 15% infill. I know that there are many grades and stiffnesses of TPU so you may have to alter these values to get a decent print with sufficient 'squishiness' to meet your needs.
I used strips of 3M double-sided tape to hold the buttons in place, simply because I had some available (it's very strong). A dab of glue is also likely to do the job.
The fixing screws are M4 x 12mm button-head hex socket.
Category: 3D Printer Parts