Jewellery Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Something to hold chains that would invariably tangle if stored in a jewellery box.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 63
- Makes
- 0
- Views
- 522
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Women
- License
- Creative Commons — Attribution — Noncommercial
My wife has a number of fine gold chains that invariably tangle if stored in a jewellery box, and she's has been asking me for a solution... so here it is.
Designed in OpenSCAD, so the design can be varied to suit the materials you have to hand. For example, I had a length of 25mm diameter aluminium tube so I used that (the attached STL files are for that diameter). I didn't try to print the main shaft, as it is easier and neater to use tubing. You can easily vary the number of arms to suit your needs - I recommend 6 or 8.
Uncomment each piece in the source file and generate the STL file before moving on to the next.
Note: The test collar was used to ensure that the shaftDiam variable in the OpenSCAD file is set to the correct value for a nice fit, before starting on the big pieces.
UPDATE: After publishing this item I realised that there was an error in the OpenSCAD code - I had selected 6 arms but, if you look at the photograph, you will see 7! Now corrected...
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
Yes
Resolution:
Whatever you like - I used 0.2
Infill:
15% for the top piece, 10% for the base.
Filament: Hobbyking PLA Black
Notes:
Only the top piece needs support. I recommend 3 layers top and bottom, and thick walls (I used 3 walls). You will need this SCAD chamfer library to generate this stand - https://www.thingiverse.com/thing:1305888
Category: Jewelry