Laptop LCD Mount for SFF PC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this display housing to make my small form factor PC portable. I used a display from an old laptop. HDMI…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 28
- Makes
- 0
- Views
- 584
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I made this display housing to make my small form factor PC portable.
I used a display from an old laptop. HDMI controllers can be found for pretty much any
display just search your display model number and it should pop up in amazon or ebay.
To make this even more portable you can use a SATA power connector to power these HDMI adapters.
I physically screwed the feet into my Cougar QBX case to make it more secure but it can stand on its own.
This Should work with many 15 inch laptop displays however if you would like to make custom adjustments here is the tinker-cad link.
I am still making adjustments to fine tune this design
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 or 0.28
Infill:
15
Notes:
You have to bridge the middle section so make sure you have fan speed at 100% It might I had to clean mine up a bit but it should bridge just fine if you have your printer tuned.
Category: Computer